Material Compatibility and Polymerization Inhibitors
You can use Plastiform on all types of materials. The product does not adhere to the part and leaves no residue. A few substances can block its polymerization, so you need to know them before you start.
Surfaces It Works on
You can apply Plastiform on metals, alloys, PVC, plastics, and wood. It also works on plaster, ceramics, composites, painted surfaces, and coated parts.
What Can Block Polymerization
According to our technical sheets, contact with certain substances can alter the polymerization reaction. This list is not exhaustive:
- Latex, including latex gloves
- Sulfur compounds
- Graphite
- Oils and greases
- Certain titanium alloys
Acetone is not a degreaser for Plastiform either, as it prevents the product from polymerizing.
What to Do
Degrease the part before every impression with DN1 or a validated degreaser, and do not wear latex gloves. When a material is in doubt, extrude a test drop on it and check that it polymerizes.
Run complete tests before you rely on a new application. For a titanium alloy that does not polymerize, contact our technical team at Rivelec.
Related Pages
- Degrease the Surface
- The Impression Stays Sticky or Does Not Polymerize
- Can Plastiform Be Used Underwater?