Technical Sheet and SDS
Every Plastiform product has two documents: a Technical Sheet and a Safety Data Sheet (SDS). Together they contain everything you need to store, handle, and use the product correctly.
Technical Sheet
The Technical Sheet provides product specifications and usage guidance. It is the primary reference for selecting and applying a product.
What it contains:
- Product name and reference number
- Initial consistency and final hardness
- Polymerization time at standard temperature (20°C)
- Shore A hardness value
- Maximum removal constraint percentage
- Recommended measuring instruments
- Compatibility with Double Blade Cutter
- Operating temperature range
- Shelf life and storage conditions
- Packaging options and capacities
- Application details
Where to find it:
Technical sheets are available on plastiform.info on each product page. They can also be requested directly from the technical team.
Safety Data Sheet (SDS)
The SDS provides safety, handling, and regulatory information. Plastiform products are non toxic and safe to handle without special equipment.
Where to find it:
SDS documents are available on plastiform.info on each product page. They are also included with commercial shipments on request.
Key Facts from the SDS
- No hazard pictograms. Plastiform products are not classified as hazardous under EU CLP regulation.
- No special ventilation required under normal use conditions.
- No respiratory protection required.
- No specific glove material required, though standard workshop gloves may be worn for comfort.
- REACH compliant. No SVHC substances above 0.1%.
- Storage: Keep cartridges and pots sealed. Store between 15°C and 25°C. Protect from direct sunlight and moisture.
