F04 Protect is a specialized protective product for gauges & cutting tools that prevents impact damage and corrosion.
This product is engineered to safeguard parts & fragile components by encasing them in a thick protective layer, effectively shielding surfaces from impacts. It also provides excellent protection against humidity and corrosion.
It maintains a pasty consistency for 20 seconds before starting to harden to a final flexible consistency.
At this stage it is no longer malleable and holds in place as close to the surface as possible, providing perfect protection and sealing. It is therefore easy to use to protect a large number of parts at the same time.
F04 Protect in cartridges is used on its own and only requires the dispensing gun to be used. It’s the best way to try the application.
It’s important to note that F04 Protect is not intended for standard Plastiform applications, as it’s a specialized product within the range. Always consult a Plastiform expert to ensure it meets your specific requirements!
This product is used in conjunction with the Application GUn (both DM-50 and DB-50) to protect fragile elements such as gauges, cutting tools, or any other parts that need protection.
To use it, you need Special Nozzles provided with the cartridges and a dispensing gun:
Degrease the element to protect using the DN1,
Mount the cartridge on your dispensing gun,
Mount the special nozzles at the end of the cartridge,
Start protecting your element,
Wait 30-45 seconds and it’s ready for storage.
Be careful, the product may harden inside the nozzle. If this happens, you will need to change the nozzle.
To prevent waste, we strongly advise using a custom most to protect all your tools at once using only the required volume of product you need.
This now, to HTML translated
References
The Dispensing gun is NOT included in any of these sets:
Are Plastiform products dangerous? Do they cause disturbances during use?
Plastiforms are safe to use; they are neither odorous nor irritating. However, we recommend using vinyl gloves as a precaution to avoid any potential risk. While no allergies have been reported thus far, we cannot entirely rule out the possibility. If you have any concerns, consult a doctor. For more detailed information, please refer to the Safety Data Sheet of the product.
Are Plastiform products sensitive to UV light?
No, our products are not sensitive to them in the short or medium term in their traditional use.
Are the product or the chemical reaction dangerous?
All our products can be used safely without the need for protective equipment.
Are plastiforms considered polluting products?
Our products are neither polluting nor toxic. However, since the packaging and products themselves are made of plastic, they should be disposed of in traditional waste facilities and not left in natural environments.
Are there any materials to which plastiforms cannot be applied?
It is possible to apply our products to any type of material and its alloys (including gold, silver, titanium). They can also be used on plastic materials, wood, resins, etc. However, certain silicone-based materials should be avoided, as they can sometimes alter the polymerization of the products. We always recommend a test before use.
How to clean the injection material after taking the impression ?
You don't need to clean the material. The nozzle is going to trash and the tip is reusable after extracting the polymerized material inside it.
Related Products
Considered the F04 PROTECT – Cartridges for your application but it doesn’t exactly answers to your requirements? You may also find these alternative products helpful.
CA-F04P-5/40
