M90 is the only malleable product to become rigid after curing. The final impression has a hardness of 90 Shore A, which means that it is non-flexible and cannot deform when removed from the mold. This plastiform can only be used on simple shapes, without any Extraction Constraint.

The rigidity of the M90 allows it to be measurable with contact. This feature can be useful for repeated indicative checks that do not require micron accuracy. Its rigidity is also highly appreciated to protect fragile parts, it prevents vibration and resonance phenomena.

The M90 is recommended for creating rigid impressions of simple external shapes (threads, grooves, grooves, etc.). It is generally used on medium to large parts.

m90 curing time chart

m90 mt-004 mt-004-b LC-AD

Product Initial consistency Final consistency Final hardness Maximum extraction constraint Working time at 20°c Setting time at 20°c Accuracy Double Blade Cutter Caliber
M90 Manual Putty Rigid 90 0% +/- 45 sec +/- 4 min +/- µm No Yes


The M90 is suitable for the following applications:

These applications do not require any particular technique to be carried out by an operator. To apply the dough, we recommend that you mix the dough properly by hand and work the surface of the dough to obtain a smooth surface. Finally, apply the M90 to the entire surface you are looking for in a completely uniform way before the polymerization is too advanced.

Impression Measurement

The M90 impression is rigid, it is controlled with or without contact using visual measuring systems:

  • Profile projector,
  • Microscope,
  • Optical measuring system.

or with contact:

  • Caliper,
  • Three-dimensional machine,

However, we recommend that you always use a visual inspection system when it is possible to do so because the results are much more efficient.

M90 plastiform malleable rigide
M90 replica of a gear
Plastiform Online Video

Click to watch the video

Packaging :

Each product is delivered in two jars of 450mL A and B (900mL total), with a measuring spoon and instructions for use.

References :

MT-004 : 900ml Pots (2x450ml)

MT-004-B : 90ml Pots (2x45ml)

Start your trial now

With the Plastiform Case, you will get every accessories required for creating 3D impressions and exploit them. Customise your case or opt for our already referenced solutions available on the website of our official distributors.

Plastiform Case
< Go Back
Go to Top