The F20 XL, initially very fluid, can easily infiltrate into different part openings. The F20XL is used for large impressions because of its long polymerization time.

The replica thus obtained is very flexible (final hardness of 20 Shore A), which allows it to resist strong stresses and deformations during its demolding.
The F20 XL is therefore recommended for impressions of complex internal shapes (threads, grooves, etc.), ensuring that the Extraction Constraint does not exceed 30%.

The impression is extremely precise, and all the details of the part (shape, appearance, dimensions, etc.) are reproduced to the nearest micrometer.
The plastiform copy is not deformed during its extraction, which gives a very efficient result. Inside the room, there will be no trace of the presence of the F20 XL.
The technical characteristics of the F20 XL also allow it to protect or save parts, it is an excellent substitute for sealing joints.

As with all high-volume products, the F20 XL has an extended working time (about 10 minutes). It is also for its polymerization time, close to 25 minutes. These temporal changes allow operators to pour the product into large spaces.

f20xl curing time chart

F20XL F20 XL ca-f20xl vr-004 vr-005 MT-AD-20 MT-AD 20

Product Initial consistency Final consistency Final hardness Maximum extraction constraint Working time at 20°c Setting time at 20°c Accuracy Double Blade Cutter Caliber
F20 XL Fluid Flexible 20 30% +/- 10 min +/- 25 min +/- µm No No


The F20 XL is designed to meet the following applications:

  • Dimensional Control of Complex Internal Forms
  • Protection, Masking and Sealing against Surface treatments

It is also possible to use it to:

  • Dimensional Control of Simple Internal Forms

To carry out these applications, you must strictly follow the guidelines in the instructions for use. Mixing manually requires extreme attention to the quantities mixed and the working time of the product. We recommend that the F20 XL be poured slowly and that the product flow into every corner, paying attention to air bubbles. These indications also apply to all other high-volume fluid products in the Plastiform range.

Impression Measurement

As the replica is very flexible, its dimensions should only be checked with visual measuring machines:

  • Profile projector,
  • Microscope,
  • Digital vision system
cartouche 400ml F20XL
F20XL plastiform logo
Plastiform Online Video

Click to watch the video

Packaging :

The product is marketed in 3 different packaging versions: 400mL cartridge, 1.7L bottles or 10.2L cans.

References :

CA-F20XL : 1 400mL cartridge + 8 Long Nozzles

VR-F20XL-1 : 1.7liter bottles

VR-F20XL-2 : 10.22liter cans

Start your trial now

With the Plastiform Case, you will get every accessories required for creating 3D impressions and exploit them. Customise your case or opt for our already referenced solutions available on the website of our official distributors.

Plastiform Case
< Go Back
Go to Top