Protection, Masking, Waterproofing

Dimensional control
The roughness control Ra
Visual inspection of surface finish
Protection, Masking, Waterproofing against surface treatments
Part holding, clamping and reinforcement before machining

Protection and Masking

Description

When you undertake a surface treatment on a part, it is often necessary to protect certain areas in order to avoid that the treatment affects some surfaces. Plastiforms, thanks to their technical characteristics, are able to create tailor-made protections for one or more parts to be treated. These molds are generally not affected by the surface treatment and can be reused many times.

By using plastiforms in large volumes, it is easy to build a mold for several parts and process them faster and easier, without the risk of damaging them. The F50 XL, for example, is one of the most widely used products against any type of surface treatment:

  • Sandblasting,
  • Polishing,
  • Aerogumming,
  • Shot blasting,
  • Microbead blasting,
  • Chrome plating,
  • Chemical treatments,
  • Heat treatments,
  • Painting.
protection masking waterproofing plastiform F50

Finally, it is possible to use cartridge products or malleable products to create custom-made caps. These products are resistant to both small and large volume surface treatment and will protect small spaces. (Threads, etc.)

Waterproofing

Description

The choice of the product is made according to the area to be controlled, its difficulty of control and also according to its external environment. (Orientation, accessibility, etc.)
Fluid plastiforms are perfectly waterproof when they have finished curing. Indeed, when the product enters a space, its technical characteristics allow it to flow and occupy the entire space, to the nearest micrometer. When cured, it does not allow anything to pass through it, which makes it easy to create custom-made sealing joints for any type of part.

The F20, thanks to its fluidity and flexibility, is the most recommended product for this type of application since, in addition to being perfectly waterproof, it is very difficult to break it. Be careful, however, that the area to be protected is dry and clean when applying F20.

Also, care should be taken to pour the product slowly and with a tip or needle so as not to create any air bubbles.

F50 XL

The F50 XL is a fluid product specially designed to build custom-made protective moulds. The F50 XL is the flagship product for masking and protection applications. It is extremely resistant and very practical...

View product

Start your trial now

With the Plastiform case, you will have all the accessories you need to take an impression in 3 dimensions and use it. Customize your case or opt for our already referenced solutions available !

contact our experts
plastiform Case